Which roofing calculator do I need?
| You want to know | Use |
|---|---|
| How many squares, shingle bundles, rolls of underlayment, drip edge and ridge cap to buy | Roofing Calculator |
| The pitch of your roof, its angle in degrees and the pitch factor | Roof Pitch Calculator |
| How long to cut each common rafter and how high the ridge sits | Rafter Length Calculator |
| What a full replacement should cost with your own prices, and how two quotes compare | Roof Replacement Cost Calculator |
Roofing numbers worth knowing
- 1 roofing square = 100 sq ft of roof surface. Shingles are priced and sold by the square.
- Most asphalt shingles come 3 bundles to the square. Check the wrapper, because some heavy designer shingles need 4 or 5.
- Pitch makes the roof bigger than the footprint. Roof area = footprint × pitch factor. A 6/12 roof is about 1.118 times its footprint and a 12/12 roof about 1.414 times.
- Allow about 10% extra on a simple gable roof and 15% or more on a hip roof or one with valleys and dormers, for cutting waste.
Measure in the right order
- Measure the length and width of the house at the walls, then add the overhang on each side.
- Find the pitch with the pitch calculator or a level and tape from the attic.
- Run the roofing calculator for materials, then the replacement cost calculator to check a quote.
Working on the roof itself is dangerous. Measure from the ground or the attic where you can, and leave tear-off and installation to an insured roofer.